Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form :(

Hillsboro Flat Screen TV Wall-Mount Cabinet


Hillsboro Flat Screen TV Wall-Mount Cabinet
$1,466.40
SKU: HFS40
UPC:
Description
Reviews
Average 5 stars out of 5 rating
Questions
Description

Intended as a wall-mount cabinet, this unit mounts to your wall with either the metal hanging brackets attached, or through holes drilled in the interior corner blocks (recommended), with your mounting hardware. (Please remove the metal hanging brackets if you intend to mount the unit to the wall through the pilot holes in the corner blocks.)

PLEASE NOTE that we do not supply the hardware required to attach the unit to the wall. You will need to determine the required hardware based on the weight of the unit (approx 56 lbs) and the type of wall to which it is being mounted. The pilot holes drilled in the corner blocks are 1/8", with a 5/16" countersink opening.

Bi-fold doors allow easy access to the TV, and the unit is 76" wide with the doors open and in the folded position. (Please note that the doors do not lay flat against the sides of the unit.)

Shown with a 46" flat screen TV (measuring 42-1/2 W x 27 H), this unit accommodates wall-mounted flat screen TVs up to 51 W x 32 H x 7 D, or 43 W x 36 H x 6 D. (Mounting blocks at the back of the top interior corners make the unit only 43 W between the blocks at the very top.)

If setting the TV inside the cabinet (rather than mounting the TV to the wall), the unit is only 6 D at the interior bottom. We do not recommend mounting the unit to the wall if you intend to set the TV inside the unit, but rather placing the unit on top of a floor cabinet. Wall-mount of TV is recommended with this unit.

To use the unit as-is, your TV must be mounted to the wall, with all wiring housed within the wall. If your wiring will run down the outside of the wall, you must request that we drill a hole in the bottom of the unit so that the wires can pass through. There is no back on this unit, and your wall will be the backdrop for the TV.

Shown here with our HFS40B-Hillsboro Media Console.

Exterior Dimensions

57-1/2 W x 39-1/2 H x 10 D

Interior Dimensions

Int Dim at door opening: 52 W x 32-1/2 H x 7-1/4 D (6 D at top & bottom)

Int Dim in center of unit: 52 W x 37-1/4 H x 7-1/4 D (6 D at top & bottom)

Finish Shown

Black

Hardware

Comes standard with 2 antique brass Teardrop Pulls.

Available Standard Sizes

Base cabinet available as HFS40B-Hillsboro Media Console (shown here).

Distress Options

Standard Distressing|Light Distressing

Hardware Options

Customer May Use Own Hardware (no upcharge)|See Hardware Chart (at upcharge)

Other Options

Drill For Wires

Item #

Hillsboro Flat Screen TV Wall-Mount Cabinet

Dimensions

57.5Wx10Dx39.5H

Reviews
5 stars out of 5 rating
 Pat
Beautifully custom crafted! Matches perfectly when paired with recommended console below.

Would you recommend to a friend?   Yes
Questions
Have a question about this item? Click here to ask

Enter your email
for 10% off your order!

Thank you!

Please check your inbox for the coupon.